AN-3 packing for aileron hinge bracket

                                                                                                                                            More
AN-3 packing for aileron hinge bracket IMG_7293-1280x853.JPG I'm using AN hardware. The AN3 replacement for the 2BA bolts on things like Aileron hinges has a larger head than the 2BA bolt. At the top end of the hinge the head of the AN3 bolt needs to clear the weld. So I took some .080" aluminium to use as packing.I've used light washers under the head of the bolt just to protect the Aluminium. The dark grey is some zinc based paint. The bolts I pulled had all been inserted with yellow zinc chromate paint - In most cases it was still soft/sticky.

Comments

No comments yet.

  •  

 

Photo info

Random image

Navigator

  • Main spar QC inspection stamp
  • AN-3 packing for aileron hinge bracket
  • AN-3 packing for aileron hinge bracket
  • AN-3 packing for aileron hinge bracket
  • AN-3 packing for aileron hinge bracket
  • Aileron bell crank
  • Aileron bellcrank upper bolts & trimmed washer
  • Aileron Bellcrank & curved washer for AN3 bolt
  • Aileron hinge brace -Spar end