Scarfing Jig and Scrap test piece.

                                                    More
Scarfing Jig and Scrap test piece. IMG_6909-1280x853.JPG The Auster repair manual calls for a 1/8" ply reinforcing strip glue over any spar repairs. The ends of the ply need to have a 1:5 chamfer or scarf. Here's my solution for getting an accurate scarf or chamfer on the ply. Here's the chamfer cut with an end mill in the router. Quite happy with the result, but can't be too agressive with the depth of cut.

Comments

No comments yet.

  •  

 

Photo info

Random image

Navigator

  • View from the rear face of the spar
  • Close up view of the cut from the rear face of the spar
  • The router bit I used.
  • Scarfing Jig
  • Scarfing Jig and Scrap test piece.
  • Replacement Grade A spruce block
  • Replacement Grade A spruce block
  • 1:5 Scarf on 1/8 ply
  • Reinforcing strip.