Photo info

Random image

Navigator

  • First tape done
  • First tapes being glued
  • Rib tapes all glued
  • Rib tapes all glued
  • Gluing drain grommets
  • A stack of pre-decimal pennys holding the grommet in contact with the fabric.
  • Last doily glued
  • This inspection hole is on the top of the wing above the aileron bell crank.
  • This inspection hole is on the top of the wing above the aileron bell crank.

Gluing drain grommets

                                                                                                      More
Gluing drain grommets IMG_8567-1280x853.JPG It took a bit of experimenting to glu the drain grommets. This was the fist solution which worked - sort of. On the elevator I treated the glue like contact cement and put down a patch of glue on the fabric and the grommet, waited for the glue to dry tacky & then stuck it down. That worked much better than the piles of Pennys.

Comments

No comments yet.

  •